ic-sd85 blcc sd1c infrared led rev a1, page 1/ 4 features ? emission peak at 850 nm matched to silicon detectors and opto ics ? narrow irradiance pattern ? high temperature range -40 to 125 c ? high switching speed ? packages suitable for smt mounting applications ? illumination for high resolution optical encoder ? modulated light barriers package blcc sd1c dimensions copyright ? 2011 ic-haus http://www.ichaus.com p r e l i m i n a r y p r e l i m i n a r y 0,7 3,83 3 , 9 1 5 , 3 6 4 , 7 1 4,59 2 , 2 0 2 , 2 0 6 0,8 0,8 8 bottom view side view top view anode (+) note 1) note 1) cathode (-) s o l d e r m a s k all dimensions in mm notes: 1) edges metallized 2) metallized areas indicated with or european projection solder mask
ic-sd85 blcc sd1c infrared led rev a1, page 2/ 4 packages pin configuration sd1c pin functions no. name function 1 a anode 2 c cathode absolute maximum ratings beyond these values damage may occur (ta = 25c, unless otherwise noted) item symbol parameter conditions unit no. min. max. g001 if forward current (dc) 50 ma g002 ifm peak forward current tp 50s, tp/t=0,5 100 ma g003 ifsm surge forward current tp 10s 1000 ma g004 vr reverse voltage 5 v g005 p power dissipation case temperature 25c 150 mw all voltages are referenced to ground unless otherwise stated. all currents ?owing into the device pins are positive; all currents ?owing out of the device pins are negative. p r e l i m i n a r y p r e l i m i n a r y bottom view 1 2 c201107-1
ic-sd85 blcc sd1c infrared led rev a1, page 3/ 4 thermal data item symbol parameter conditions unit no. min. typ. max. t01 ta operating ambient temperature range -40 125 c t02 ts storage temperature range -40 125 c t03 tpk re?ow soldering peak temperature convection re?ow: 260 c tpk < 20 s, tol (time on label) 8 h please refer to customer information ?le no. 7 for details. not suitable for vapor phase soldering. t04 rthja thermal resistance junction to ambient 270 k/w electrical characteristics ta = 25 c, unless otherwise noted item symbol parameter conditions unit no. min. typ. max. electrical and optical characteristics 001 vf forward voltage if = 10 ma 1.65 1.9 v 002 vf forward voltage if = 20 ma 1.75 2.0 v 003 vr reverse voltage ir = 100 a 5 v 004 e radiant power if = 10 ma 0.5 0.9 mw 005 e radiant power if = 20 ma 1.0 1.8 mw 006 tk( e ) temperature coef?cient of radi- ant power if = 5 ma, ta = 25 c...125 c -0.6 %/k 007 p peak wavelength if = 10 ma 830 850 870 nm 008 spectral half width if = 10 ma 26 nm 009 2 divergence if = 10 ma 8 deg. 010 tr, tf switching time if = 10 ma 50 ns ic-haus expressly reserves the right to change its products and/or speci?cations. an info letter gives details as to any amendments and additions made to the relevant current speci?cations on our internet website www.ichaus.de/infoletter ; this letter is generated automatically and shall be sent to registered users by email. copying C even as an excerpt C is only permitted with ic-haus approval in writing and precise reference to source. ic-haus does not warrant the accuracy, completeness or timeliness of the speci?cation and does not assume liability for any errors or omissions in these materials. the data speci?ed is intended solely for the purpose of product description. no representations or warranties, either express or implied, of merchantability, ?tness for a particular purpose or of any other nature are made hereunder with respect to information/speci?cation or the products to which information refers and no guarantee with respect to compliance to the intended use is given. in particular, this also applies to the stated possible applications or areas of applications of the product. ic-haus conveys no patent, copyright, mask work right or other trade mark right to this product. ic-haus assumes no liability for any patent and/or other trade mark rights of a third party resulting from processing or handling of the product and/or any other use of the product. as a general rule our developments, ips, principle circuitry and range of integrated circuits are suitable and speci?cally designed for appropriate use in technical applications, such as in devices, systems and any kind of technical equipment, in so far as they do not infringe existing patent rights. in principle the range of use is limitless in a technical sense and refers to the products listed in the inventory of goods compiled for the 2008 and following export trade statistics issued annually by the bureau of statistics in wiesbaden, for example, or to any product in the product catalogue published for the 2007 and following exhibitions in hanover (hannover-messe). we understand suitable application of our published designs to be state-of-the-art technology which can no longer be classed as inventive under the stipulations of patent law. our explicit application notes are to be treated only as mere examples of the many possible and extremely advantageous uses our products can be put to. p r e l i m i n a r y p r e l i m i n a r y
ic-sd85 blcc sd1c infrared led rev a1, page 4/ 4 ordering information type package options order designation ic-sd85 sd1c ic-sd85 blcc sd1c for technical support, information about prices and terms of delivery please contact: ic-haus gmbh tel.: +49 (61 35) 92 92-0 am kuemmerling 18 fax: +49 (61 35) 92 92-192 d-55294 bodenheim web: http://www.ichaus.com germany e-mail: sales@ichaus.com appointed local distributors: http://www.ichaus.com/sales_partners p r e l i m i n a r y p r e l i m i n a r y
|
